Gimbal “XAircraft Stella” Brushless


Compatibile con GoPro 3+ e dal design compatto, XAircraft Stella  è estremamente piccola (120g) e facile da montare. Viene venduta in kit con gimbal, motori e controller, oltre a 4 dump in gomma antivibrazioni, cavi a 3 pin e plug USB.

– Estremamente leggera, solo 120g
– Due modalità attivabili: Rate e Position
– Rotazione di 90° viia switch
– Software personalizzabile integrato ed aggiornabile
– GoPro 3 USB charging port/AV out


Camera: GoPro Hero3/Hero3+
Wind-resistence: <8m/s (17.9mph/28.8 km/h)
Max Remote Control Angle: Roll -10°-10°, Pitch -110°-20°
Attituide Precision: 0.08°
Environment Temperature Limits: -10°C-55°C
Remote Controller: Standard receiver with minimum 9 Channel or S.BUS   Receiver
Config Software: Windows System only
Electronic Specification: Voltage DC 10.5V-22.2V (3S-6S)
Power consumption: Max 10.2W (0.85A@12.0V), Normal (0.25A@12.0V)
Weight: 120g/195g (with GoPro onboard)

stella gimbalstella gimbal2

a) Mode1: When you pitch 90°, STELLA is looking straight down.
b) Mode2: When you pitch 90°, STELLA is looking straight up. With some modifications to the mounting system you can use STELLA on a model plane rather than a multicopter.
1. Initial Angle: This is the initial angle of your GoPro after STELLA is powered up.
2. Default Mode: The default control mode when connection is via a standard receiver.
3. Remote Control Angle Limit: You can tune the angle limits controlled via your transmitter for pitch and roll.
4. Stick Control Gain: This controls the rotation speed of the gimbal. The smaller the gain, the slower speed

RcGroups: Stella Gimbal

1 thought on “Gimbal “XAircraft Stella” Brushless

  1. Fredericka

    I just could not go away your web site prior to suggesting
    that I really enjoyed the usual info an individual supply for
    your guests? Is going to be back incessantly to check up on new posts


Lascia un commento

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *